Tandberg Data StorageLoader Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 89

Tandberg Data StorageLoader Скачать руководство пользователя страница 25

25 StorageLoader Installation and User Manual

3.1.11. Step 11. BCR: Labelling of cartridges

If your loader is equipped with a barcode reader and you want to use this functionality, you need to
attach barcode labels to the cartridges.

Note

You need to use StorageLoader specific bar code labels to ensure reliable
functionality of the barcode reader.

Caution

Cartridge labels must be oriented on the cartridges as shown in the Figure 3.10.
Other orientations of the cartridge labels may interfere with the loaders operation.

Figure 3.10. Positioning of bar code label for LTO cartridges.

If you need more cartridge labels, you can order more labels from your local Tandberg Data sales
representative. Two types of cartridge labels are available. See Figure 3.11 below for part numbers.

Figure 3.11. Available Tandberg Data Cartridge Labels.

Figure 3.11 show the two Tandberg Data specific cartridge labels available. It also show the
corresponding part numbers needed when ordering labels. They are also listed in Appendix B. Spare
Parts and Accessories.

For the cleaning cartridges, use the labels starting with prefix CLN. In the right-most image, the prefix
of this type of label is CLNvnnLg, where v identifies a drive unique cleaning cartridge, nn is used to
track individual cleaning cartridge activity (for example usage and life), and g is the LTO generation.

In this figure, the dotted rectangle show the correct placement for the cartridge labels.

Label for all LTO cartridges: Part No. 870222

Labels for LTO3-cartridges: Part No. 1015514

Labels for LTO4-cartridges: Part No. 1017351

«
...
23
24
25
26
27
...
»

Содержание StorageLoader


























































































Отзывы:

Нет отзывов