Tandberg Data SDLT220-320 INTEGRATION, Руководство по эксплуатации продукта

Страница: 116 / 142

APPENDIX A: SDLT I Tape Cartridge
When a tape cartridge is loaded in the drive and the tape cartridge’s write-protect
switch is moved to its write-protected position (to the left as you face the label/
switch side of the tape cartridge), the drive turns on its write-protect indicator LED
immediately. If the drive is currently writing to the tape, the write-protect feature
does not take effect until after the current WRITE operation completes.
Table A-1. Write-Protect Switch Positions
Write-Protect
Switch Position
Orange
Write-
Protect
Indicator
Result
Before Loading the Cartridge
Enabled
(Slide switch to left)
Visible
Data cannot be written to the tape.
Existing data on the tape cannot be overwritten.
Additional data cannot be appended to the media.
Disabled Not Visible
Unless the cartridge is write-protected via software:
- Data can be written to the tape.
- Existing data on the tape can be overwritten.
- Additional data can be appended to the media.
After Loading the Cartridge and During Operation
If the write-protect
switch is moved
from its right
(disabled) position
to its left (enabled)
position
Visible
If the drive is currently writing to tape, the write-
protect feature does not take effect until after the
current WRITE operation completes.
If the write-protect
switch is moved
from its left
(enabled) position to
its right (disabled)
position
Not Visible
The tape becomes write-enabled after a variable
amount of seconds.