Tandberg Data SDLT220-320 INTEGRATION, Руководство по эксплуатации продукта

Страница: 111 / 142

APPENDIX A
SDLT I Tape
Cartridge
From the outside, the SDLT I cartridge looks very similar to the DLT IV cartridges.
The basic geometry, write protection switch, and label space are unchanged from
the DLT IV cartridge. This simplifies the integration of SDLT into existing
operating environments and into automated tape libraries. The SDLT I cartridge is
easy to recognize; it has a different color (green) than the DLT IV cartridge
(charcoal) and contains a distinctive pattern molded into the shell. The SDLT I
cartridge has a keying feature to ensure that it cannot be loaded into a previous
generation DLT drive.
By following general handling procedures, conducting careful visual inspections
of tape cartridges on a regular, ongoing basis, and making sure that tape cartridges
are stored within their environmental limits, you will greatly reduce any chance
that you will experience problems with your tape cartridges or cause damage to
your SDLT system. Respect your media as much as you do your data.
This appendix discusses the SDLT I tape cartridge; refer to Appendix B, “DLT IV
Tape Cartridge” for DLT IV cartridge information.
This appendix covers:
•
Tape Cartridge Handling Guidelines
•
Tape Cartridge Inspection Procedure
•
Tape Cartridge Write-Protect Switch
•
Loading a Tape Cartridge
•
Unloading a Tape Cartridge
•
Overwriting 320-Formatted SDLT Tape Cartridges .