Tanco 580-J, Руководство оператора

Страница: 17 / 44

- 17 -
Tanco Autowrap 580-S/J
Operator’s manual
4. Transport Instruction
4.1 Never use straps around machine when lifting. Use only the following lifting points: - Tow hitch and two
sockets on each side of Chassis at rear for trailed models. 3 pt. Linkage frame and two sockets on each
side of Chassis frame at rear for 3 pt. Linkage Model.
4.2 When the machine is towed on the road the lifting arm (if fitted) must be in fully raised position, the safety
prop fitted and the axle returned to narrowest position.
4.3 Raise the Parking Jack on trailed models before moving machine.
5. Machine Identification
The Serial Number plate is located on Chassis forward of offside wheel on trailed models and on 3pt.
Linkage frame for 3pt. Linkage model.
Always refer to this number when ordering parts. The Spare parts catalogue number and description should
be used. The reference numbers are used to help identifying the spare part.
For your records write serial number here.
SERIAL NO.
6. Preparation of a new machine
Check height of film mast to ensure that centre line of film spool is level with the centre line of the bale
on the turntable. This will alter with different bale diameters. If this alignment is not correct some adjustment
may be required. See fig 1.
When connecting to John Deere* tractor the valve must be converted to closed centre. (see p. 32 )
Hydraulic connections
Connect the feed and return hoses from the Autowrap valve to the tractors double acting facility.
NOTE: The return hose is fitted with a non-return valve to protect the Autowrap from damage in the event of
incorrect connecting to the tractor hydraulics.
NOTE: To ensure the maximum efficiency and longevity of hydraulics components this machine requires a
clean supply of hydraulic oil.
IT IS RECOMMENDED THAT THE TRACTOR HYDRAULIC FILTER ELEMENT TO BE REPLACED AND
THERE AFTER MAINTENANED IN ACCORDANCE WITH THE MANUFACTURES RECOMMENDATIONS.