Tanco 580-J, Руководство оператора

Страница: 16 / 44

- 16 -
Tanco Autowrap 580-S/J
Operator’s manual
Operational test
When all above assembly and checks have been carried out, the operation of the machine should be
checked as follows:
NOTE: IF YOU ARE NOT TOTALLY FAMILIAR WITH THE OPERATION OF THE TANCO CONTROL
SYSTEM, READ THIS MANUAL IN FULL BEFORE PROCEEDING WITH OPERATIONAL TEST.
1. Attach machine to tractor
2. Connect hydraulic hoses to D/A service on tractor.
3. Fit controller box inside cap.
4. Connect control box to the machine and connect power cable direct to the tractor battery. It is important
that the leads are connected with the correct polarity.
5. Fit cable control actuator socket to convenient position in cab and locate actuators in socket
6. Lock hydraulic lever in tractor so that oil is flowing through system
7. Check function by operating control levers.
(a) Lift arm up and lift arm down. NOTE: Ensure lift arm is down before moving to (b)
(b) Turntable rotation forward and reserve.
(c) Tip up and down checking hoses are okay.
3. Customer checks
Before despatching consult customer on the following points:
1. That machine model suits his requirements.
2. If the machine is to be operated on a tractor with a closed centre hydraulic system then a closed centre
value is required, see separate instructions.
3. Check that the tow hitch type is compatible with the tractor. Three different hitch types are available.