WARNINGS
AND
SAFETY
INSTRUCTIONS
Operator
safety
○
Always wear a safety face shield or goggles.
○
Always wear heavy, long pants, boots and gloves. Do not wear
loose clothing, jewelry, short pants, sandals or go barefoot.
Secure hair so it is above shoulder length.
○
Do not operate this tool when you are tired, ill or under the
in
fl
uence of alcohol, drugs or medication.
○
Never let a child or inexperienced person operate the
machine.
○
Wear hearing protection. Pay attention to your surroundings.
Be aware of any bystanders who may be signaling a problem.
Remove safety equipment immediately upon shutting o
ff
engine.
○
Never start or run the engine inside a closed room or building.
Breathing exhaust fumes can kill.
○
Keep handles free of oil and fuel.
○
Keep hands away from cutting equipment.
○
Do not grab or hold the unit by the cutting equipment.
○
When the unit is turned o
ff
, make sure the cutting attachment
has stopped before the unit is set down.
○
When operation is prolonged, take a break from time to time
so that you may avoid possible Hand-Arm Vibration Syndrome
(HAVS) which is caused by vibration.
WARNING
○
Antivibration systems do not guarantee that you will not sustain
Hand-Arm Vibration Syndrome or carpal tunnel syndrome.
Therefore, continual and regular users should monitor closely
the condition of their hands and
fi
ngers. If any symptoms of the
above appear, seek medical advice immediately.
○
If you are using any medical electric/electronic devices such
as a pacemaker, consult your physician as well as the device
manufacturer prior to operating any power equipment.
Unit
/
machine
safety
○
Inspect the entire unit/machine before each use. Replace
damaged parts. Check for fuel leaks and make sure all
fasteners are in place and securely tightened.
○
Replace parts that are cracked, chipped or damaged in any
way before using the unit/machine.
○
Make sure the safety guard is properly attached.
○
Keep others away when making carburetor adjustments.
○
Use only accessories as recommended for this unit/machine
by the manufacturer.
WARNING
Never modify the unit/machine in any way. Do not use your unit/
machine for any job except that for which it is intended.
Fuel
safety
○
Mix and pour fuel outdoors and where there are no sparks or
fl
ames.
○
Use a container approved for fuel.
○
Do not smoke or allow smoking near fuel or the unit/machine or
while using the unit/machine.
○
Wipe up all fuel spills before starting engine.
○
Move at least 3 m away from fueling site before starting
engine.
○
Stop engine before removing fuel cap.
○
Empty the fuel tank before storing the unit/machine. It is
recommended that the fuel be emptied after each use. If fuel is
left in the tank, store so fuel will not leak.
○
Store unit/machine and fuel in area where fuel vapors cannot
reach sparks or open
fl
ames from water heaters, electric
motors or switches, furnaces. etc.
WARNING
Fuel is easy to ignite or get explosion or inhale fumes, so that
pay special attention when handling or
fi
lling fuel.
Cutting
safety
○
Do not cut any material other than grass and brush.
○
Inspect the area to be cut before each use. Remove objects
which can be thrown or become entangled.
○
For respiratory protection, wear an aerosol protection mask
when cutting the grass after insecticide is scattered.
○
Keep others including children, animals, bystanders and
helpers outside the 15 m hazard zone. Stop the engine
immediately if you are approached.
○
Always keep the engine on the right side of your body.
○
Hold the unit/machine
fi
rmly with both hands.
○
Keep
fi
rm footing and balance. Do not over-reach.
○
Keep all parts of your body away from the mu
ffl
er and cutting
attachment when the engine is running.
○
Keep cutting attachment below waist level.
○
When relocating to a new work area, be sure to shut o
ff
the
machine and ensure that all cutting attachments are stopped.
○
Never place the machine on the ground when running.
○
Always ensure that the engine is shut o
ff
and any cutting
attachments have completely stopped before clearing debris
or removing grass from the cutting attachment.
○
Always carry a
fi
rst-aid kit when operating any power
equipment.
○
Never start or run the engine inside a closed room or building
and/or near in
fl
ammable liquids. Breathing exhaust fumes can
kill.
Maintenance
safety
○
Maintain the unit/machine according to recommended
procedures.
○
Disconnect the spark plug before performing maintenance
except for carburetor adjustments.
○
Keep others away when making carburetor adjustments.
○
Use only genuine Tanaka replacement parts as recommended
by the manufacturer.
Transport
and
storage
○
Carry the unit/machine by hand with the engine stopped and
the mu
ffl
er away from your body.
○
Allow the engine to cool, empty the fuel tank, and secure the
unit/machine before storing or transporting in a vehicle.
○
Empty the fuel tank before storing the unit/machine. It is
recommended that the fuel be emptied after each use. If fuel is
left in the tank, store so fuel will not leak.
○
Store unit/machine out of the reach of children.
○
Clean and maintain the unit carefully and store it in a dry place.
○
Make sure engine switch is o
ff
when transporting or storing.
○
When transporting in a vehicle, cover blade with blade cover.
If situations occur which are not covered in this manual, take care
and use common sense. Contact your Tanaka dealer if you need
assistance. Pay special attention to statements preceded by the
following words:
WARNING
Indicates a strong possibility of severe personal injury or loss of
life, if instructions are not followed.
CAUTION
Indicates a possibility of personal injury or equipment damage,
if instructions are not followed.
NOTE
Helpful information for correct function and use.
CAUTION
Do not disassemble the recoil starter. You may get a possibility
of personal injury with recoil spring.
8
000Book̲TBC-270S.indb 8
000Book̲TBC-270S.indb 8
2012/06/21 16:41:58
2012/06/21 16:41:58