tams elektronik LD-G-3 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 23

tams elektronik LD-G-3 Скачать руководство пользователя страница 4

LD-G-3 / LD-W-3

English

Page 23

!

How to use this manual

If you have no specialist technical training, this manual gives step-by-step
instructions for safe and correct fitting of the module, and operation. Before
you start, we advise you to read the whole manual, particularly the chapter
on safety instructions and the FAQ chapter. You will then know where to
take care and how to prevent mistakes which take a lot of effort to correct.
Keep this manual safely so that you can solve problems in the future. If you
pass the module on to another person, please pass on the manual with it.

Intended use

Caution:

Integrated circuits are very sensitive to static electricity. Do not touch
components without first discharging yourself. Touching a radiator or
other grounded metal part will discharge you.
The module can be used according to the specifications of this manual.
It is designed for the mounting in a model railway locomotive with d.c.
motor (LD-G-3) or a.c. motor (LD-W-3).
It evaluates the Motorola format data sent by the digital central unit to
its address. The decoder controls the vehicle performance (velocity,
direction of travel, acceleration) and switches the lighting.
The module is not suitable for children under the age of 14.
Reading, understanding and following the instructions in this manual
are mandatory for the user.
Any other use of the kit is inappropriate and invalidates any guarantees.

«
...
2
3
4
5
6
...
»

Содержание LD-G-3
























Отзывы:

Нет отзывов