F.
FILM SLITTERS
This machine is equipped with safety film slitters in the back for trimming film in between sheets of
laminated material. The short slitter is for 2-side laminated film while the longer slitter is for 1-side
laminated material. Simply slide the cutting edge across the film to remove the finished material.
4 TURNING OFF THE LAMINATOR
Upon completion of the laminating job, please press the “COLD” key and make sure the motor control
switch is on “STOP” position. We recommend turning off the machine only after the roller
temperature is lower than 80°C (176°F) to protect the heated rollers. Make sure the rear fans are also
turned off.
In case you need to turn the machine off while the roller temperature is higher than 80°C (176°F),
make sure that the rollers are disengaged with the handle in “UP” position before turning off the
power switch.
MOUNTING WITHOUT LAMINATION
