Talon TP-60BA, Руководство пользователя

Страница: 30 / 39

TP-60BA (Rev 2.2)
- 27 -
TALON TECH CO. LTD.
7-1 Pump Parts Dis/Assembly
7-1-1 Pump Cover Dis/Assembly
1. As per the below [PIC 1], use 2mm wrench to release Pump Cover Mounting M3 Screw(14ea) to
open the cover.
2. The assembly is the reverse order of the disassembly.
[Notice]
When the cover opens, be careful not to cut the finger.
Don
’ t dis/assemble the interior parts inside the pump.
7-1-2 Driving Shaft Condition Check & Grease up on Ball Screw
1. Check the motor ’ s vibration & noise when the pump works.
2. Check the bolts tightening condition and ball screw worn-out condition.
3. Check any interruption between cables & moving parts.
4. Check the conditions of linear bushing /shaft when the pump works.
5. Grease up on ball screw & LM linear bushing.
6. Grease up every 6 months.
7. The assembly is the reverse order of the disassembly.
[Notice]
Maintenance 7
[PIC 1]
Pump Cover
Cover Mounting Screws (14ea)