Talon TP-60BA, Руководство пользователя, Страница: 18 / 39

TP-60BA (Rev 2.2)
- 15 -
TALON TECH CO. LTD.
On Config Pump screen, when you touch ‘ Set ID ’ , Password input screen shows and input ‘ 0901 ’ and
touch Ent. And then, ‘ Check ID ’ ‘ Set ID ’ screen shows and disappears right away so the initial starts.
If there is no response from the pump, the window keeps showing. If there is already the same
pump ID, the window
– ‘ Conflict ’ shows and push ‘ OK ’ and reset.
6-1-8 Maint Mode, Run Mode, Pump Reset Setting
Main Mode is to show the message of pump operation on the text window. Run Mode only shows
as data code. The setting method is to touch Maint Mode, Run Mode button and input password
and touch
‘ Ent ’ . In case of no response from pump, message of mode keeps showing. Pump reset
works right after input password. It goes to the initial screen same as power off and on.