manualshive.com logo in svg

TallyGenicom Intelliprint 8026DN, Руководство пользователя

Поделиться
Скачать
TallyGenicom Intelliprint 8026DN Скачать руководство пользователя страница 68

Jun 06

2-14

TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide

Loading Paper

NOTE:

Make sure set the envelope flaps are completely unfolded when loading envelopes 

that are under 220 mm in width.

Loading Paper in Paper Tray

This section describes how to load paper in the standard and optional paper trays. All trays are 
loaded the same way. 

NOTE:

Do not remove the tray during printing. It may cause a paper jam.

1. Pull the tray out of the printer until it stops. Hold the tray with both hands, lift the front 

slightly, and remove it from the printer. 

2. Slide the width guides to the edge of the tray. The width guides should be fully extended. 

NOTE:

When loading paper that is 210 mm wide such as A4 size paper, set the tab on the 

side of the tray to the [A4] position.

Содержание Intelliprint 8026DN

























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды