TallyGenicom Intelliprint 8026DN Скачать руководство пользователя страница 43

Страница: 43 / 248

Jun 06

TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide

1-17

Loading Paper

3. Squeeze the length guide and slide it to the edge of the tray.

4. Before loading the print media, flex the sheets back and forth, and then fan them.

Straighten the edges of the stack on a level surface.

5. Place the print media into the tray with the recommended print side face up.

Important

• Do not exceed the maximum fill line in the tray. Overfilling the tray may cause paper jams.

6. Slide the width guides and length guide until they rest lightly against the edge of the print

media stack.

Содержание Intelliprint 8026DN

























































































































































































































































Результаты поиска

Содержание Intelliprint 8026DN

Отзывы:

Бренды по названию

Популярные бренды

TallyGenicom Intelliprint 8026DN, Руководство пользователя

Результаты поиска

Содержание Intelliprint 8026DN

Отзывы:

Бренды по названию

Популярные бренды