manualshive.com logo in svg

TallyGenicom Intelliprint 8026DN, Руководство пользователя

Поделиться
Скачать
TallyGenicom Intelliprint 8026DN Скачать руководство пользователя страница 188

Jun 06

7-40

TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide

Date/Time Menu

Date/Time Menu

NOTE:

This menu selection will only appear if the Real Time Clock Option has been 

installed.

 

Please contact your dealer for more information on this feature.

The Date/Time Menu provides access to the printer settings that are related to print quality. Use 
the following procedure to enter the Date/Time Menu:

1. Press the 

MENU

 button on the control panel.

2. Press the 

NEXT

 button until the text “

Date/Time Menu

” is shown on the second line of the 

display.

3. Press the 

SELECT

 button to enter the menu.

4. Press the 

NEXT

 button to move through the submenus:

 Month, Day, Year, Hour, Minute, 

Second, 

and

 Offset from GMT

.

 

Press the 

SELECT

 button to enter a submenu.

Use the procedures in the following table to access and change the system settings: 

  ◆            ◆            ◆

SUBMENUS

AVAILABLE SETTINGS

PROCEDURE FOR CHANGING SETTING 

MONTH

This submenu allows you to set the 
current month. 

January – December

 1. Press NEXT or PREVIOUS to scroll through 

the months. 

 2. Press SELECT to choose and set the 

month.

DAY

This submenu allows you to set the 
current day.

Monday – Sunday

 1. Press NEXT or PREVIOUS to scroll through 

the days. 

 2. Press SELECT to choose and set the day.

YEAR

This submenu allows you to set the 
current year. 

2000 – 2099

 1. Press NEXT or PREVIOUS to scroll through 

the years. 

 2. Press SELECT to choose and set the year.

HOUR

This submenu allows you to set the 
current hour. 

1-12

 1. Press NEXT or PREVIOUS to scroll through 

the hours. 

 2. Press SELECT to choose and set the hour.

MINUTE

This submenu allows you to set the 
current minute. 

1 – 59

 1. Press NEXT or PREVIOUS to scroll through 

the minutess. 

 2. Press SELECT to choose and set the 

minute.

SECOND

This submenu allows you to set the 
time in seconds. 

1 – 59

 1. Press NEXT or PREVIOUS to scroll through 

the seconds. 

 2. Press SELECT to choose and set the 

second.

OFFSET FROM GMT

This submenu allows you to set time 
for a different time zone in hours, 
minutes and seconds. 

-12 t 12

 1. Press NEXT or PREVIOUS to scroll through 

the submenus. 

 2. Press SELECT to choose and set the hours, 

minutes or seconds.

Содержание Intelliprint 8026DN

























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды