manualshive.com logo in svg

TallyGenicom Intelliprint 8026DN, Руководство пользователя

Поделиться
Скачать
TallyGenicom Intelliprint 8026DN Скачать руководство пользователя страница 200

Jun 06

8-12

TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide

Using the Hard Disk/Compact Disk Option and User Flash DIMM Module

Device Parameter Sets

When installed, a device parameter set will be supported for either or both FLASH SIMM and 
hard disk options. The parameter sets can be referenced using the device names 

%flash%

 or 

%disk0%

. Each parameter set will include the following parameters:

■

LogicalSize

■

Writeable

■

BlockSize

■

Searchable

■

SearchOrder

■

Type

■

Mounted

■

HasNames

■

PhysicalSize

■

InitializeAction

■

Free

■

Removable

Warmstart.ps and Sys/Start Files

When either or both the FLASH SIMM or hard disk/compact flash options are installed, there 
are two features which provide support for automatic execution of a PostScript program during 
power-on initialization. 

The first feature is the 

warmstart.ps

 file. Each time the printer is powered on, either or both 

optional storage devices will be checked for a file named 

warmstart.ps

. If this file is found, it will 

be read and parsed by the PostScript interpreter.   It is up to the PostScript programmer to cre-
ate the content of this file and get the file onto the storage device using the PostScript device 
and file operators.

The second feature is the 

Sys/Start 

file. If either or both of the optional storage devices are 

installed, an additional parameter will be supported in the System Parameter set. This parame-
ter is an integer parameter called 

StartupMode

 and is set to 1 by default. 

NOTE:

This parameter can be read or written using the 

dosysstart

 and 

setdosysstart

 

operators.

Each time the printer is powered on, if the StartupMode parameter is set to 1, either or both the 
optional storage devices will be searched for a file called 

Sys/Start

, a file named 

Start

 in a path 

called 

Sys

. If this file is found, it will be read and parsed by the PostScript interpreter. Again, it is 

up to the PostScript programmer to create the content of this file and get the file onto the stor-
age device using the PostScript device and file operators.

Содержание Intelliprint 8026DN

























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды