manualshive.com logo in svg

TallyGenicom Intelliprint 8026DN, Руководство пользователя

Поделиться
Скачать
TallyGenicom Intelliprint 8026DN Скачать руководство пользователя страница 199

Jun 06

TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide

8-11

Using the Hard Disk/Compact Disk Option and User Flash DIMM Module

Format Usr Flash

This selection will reformat the FLASH SIMM. All files on the FLASH SIMM will be deleted if this 
function is selected.

Flash Summary

This selection will print a page containing information about the FLASH SIMM including a list of 
all the current existing files and directories.

Using the FLASH SIMM or Hard Disk/Compact Flash Option as 

a PostScript Device

In order to allow PostScript programs to access the FLASH SIMM and/or hard disk/Compact 
Flash options, a full implementation of a PostScript storage device is provided. This section dis-
cusses an overview of the PostScript operators and parameter sets that are included in the sup-
port. 

For detailed information on using the operators/parameter sets, please refer to the following 
publications:

■

PostScript Language Reference Manual

■

Adobe PostScript 3 Version 3010 Product Supplement

Device Names and Priority

The device names assigned to the FLASH SIMM and hard disk options are as follows:

If both devices are installed, both devices can be referenced uniquely by name. If no device 
name is specified in the PostScript operation, the 

SearchOrder

 parameter in the device param-

eter set establishes the priority for file operations. When both devices are installed, the 

Sear-

chOrder

 value for the hard disk is set to 1, while the 

SearchOrder

 value for the FLASH SIMM is 

set to 2. This gives priority to the hard disk.

PostScript Operators

All of the standard file-object related operators (file, read, write, etc.) are supported. In addition, 
following is a list of device-related PostScript Compatibility operators that are supported for use 
with the FLASH SIMM(

%flash%

) or hard disk (

%disk0%

) options:

■

devdismount

■

devforall

■

devformat

■

devmount

■

devstatus

■

diskonline

■

diskstatus

■

initializedisk

■

dosysstart

■

setdosysstart

%flash% 

device name for the FLASH SIMM

%disk0%

device name for the hard disk

Содержание Intelliprint 8026DN

























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды