TallyGenicom 6600 Series, Руководство по обслуживанию

Страница: 383 / 474

Stacker Motor Check
383
WARNING
The constant force spring is powerful and under high tension. Protect
your hands with gloves. To avoid pinching or cutting your fingers, grip
the spring and drum firmly in the next two steps. Coil the spring slowly
and carefully. Do not let the spring twist or crimp.
3. Remove the shoulder screw, large washer, spacer, and small washer
from the constant force spring and drum. Let the spring coil itself up until it
reaches the top of its travel on the vertical rail. (Figure 89.)
4. Firmly gripping the spring and drum, remove the rail screw and washer
securing the spring to the vertical rail. (Figure 89.)
5. Position a new constant force spring on the vertical rail and install the rail
screw and washer. (Figure 89.)
6. Install the shoulder screw, large washer, spacer, and small washer as
shown in Figure 89.
Figure 89. Removing and Installing the Constant Force Spring
Rail Screw
Washer
Constant Force Spring
Large Washer
Drum
Shoulder Screw
Spacer
Small
Washer