Tally T2040, Руководство по обслуживанию

Страница: 35 / 108

4.6.2
Error messages via the
display
Load paper from ...
The paper has run out during operation. The printer has been switched on, but no
paper has been inserted. Insert paper in the active sheet feeder.
The paper is not fed past the light barrier.
Place the paper more to the left.
Printhead hot The printer prints at lower speed, no action required. When this message comes up
even in a “cold” printer, please contact your dealer.
Parity Error
Transmission error from computer to printer via the optional serial interface
Compare the interface configuration of your printer with the settings of your com-
puter (protocol).
Check the cable, if necessary replace it.
The cable exceeds the maximum allowed length.
Frame Error
Transmission error (serial interface)
Compare the format setting of your printer with the setting of your computer.
Check the permissible cable length.
See parity error.
Hardware Alarm
No internal power. Try switching off and on. Check if changes to options have been
previously carried out. Note down the display message. Contact your dealer.
Overrun Error Received data which has not yet been printed is overwritten with new data.
Check that the correct busy protocol (e.g. XON XOFF) is set in the menu Serial
interface, protocol.
Check the interface cable (see the reference manual on CD-ROM, section Con-
necting the printer to the computer and chapter Interfaces ).
Eject Error
The printer cannot eject the paper or cannot place the paper in the park position.
Check the following:
Whether the paper path is blocked by a foreign object.
Whether the paper is damaged.
Whether the upper friction is down and clicked into place.
Whether the print head gap is too small.
Load Error The printer cannot feed in the loaded paper, check the following:
Whether the paper path is blocked by a foreign object.
Whether the paper is damaged.
Whether the tractors are closed and locked.
Whether the paper is too tight or loose.
Whether the paper is within the specified range.
Test functions, troubleshooting and maintenance Troubleshooting
4-15