Tally T2040, Руководство по обслуживанию

Страница: 107 / 108

Assembling the FAW
—
Place the empty side plate so that the outside faces down and the bottom edge
towards you.
– Insert the toothed wheel A (item 96*)
positioned under the push bar.
– If necessary, attach the slide FAW B (item 71)
and the position ruler C (item 95) to the push
bar D (item 70).
– Position the gear shaft rear E (item 81) in the
location provided in the side plate in such a
way that the ring with the pins points toward
you and the curve of the semidisc points to
the right. In addition, the straight side of the
semidisc must be at an angle of 90 degrees to
the side plate. The gear shaft rear is not
fastened. Mount the toothed wheel 1 (item 76)
and 2 (item 77). Ensure that the position of the
gear shaft E remains unchanged.
A
B
C
D
E 1 2
* The item numbers in brackets correspond to those in the
maintenance manual, chapter 6, “Spare parts and
schematics”.
T2040
ADDENDUM
T2140