Tally Dascom DM-310, Руководство пользователя

Страница: 61 / 90

Tally Dascom DM-310/320 User Guide V1.0
60
4.2 Verticle Alignment Mode
Open the rear cover, hold down Feed Key and switch on printer till buzzer beeps twice. Now the
printer enters vertical alignment mode.
Every time you press the Feed key, the printer prints another vertical printout. When the outcome
meets your need, turn off the printer. The vertical alignment outcome is saved.
4.3 Hexadecimal Dumping Mode
Hold down Feed Key and switch on printer till buzzer beeps twice. Press the FEED button and the
buzzer will beep once. Now the printer enters hex dump mode.
When self-test is OK but on-line printing error occurs, you can check the communication between
PC and program via Hexadecimal Dump mode. In Hexadecimal Dump mode, the printer will print
out hexadecimal data once it receives the signal from host. You can ask technical service for
analysis.
The printer starts printing “HEX DUMP PRINT MODE” followed by the received data printed in
hexadecimal numbers and some characters.
CAUTION!

The printer prints “.” if there is no characters corresponding to data.

During hexadecimal dump, functions except some command will be disabled.

If print data does not cover a line, press the FEED switch to print the line.
Printing example:
Hexadecimal Dump
To terminate hexadecimal dump,
Press FEED button three times.
1B 21 00 1B 26 02 40 40 1B 69 . ! . . & . @@ . i
1B 25 01 1B 63 34 00 1B 30 31 . % . . c 4 . . 0 1
41 42 43 44 45 46 47 48 49 4A A B C D E F G H I J
*** completed
***