Tally Dascom DM-210, Руководство пользователя

Страница: 31 / 53

Tally Dascom DM-210/220
19
4.3 Removing Jammed Paper
After printing, print head may be hot, please do not touch!
(1) Turn the printer off, open the top cover and front cover.
(2) DM-210: Pull up the ribbon cartridge and print head cover.
DM-220: Turn up the cut device; pull up the ribbon cartridge and print head cover.
(3) Remove jammed paper carefully.

If jammed paper gets stuck in cut device, turn the knob on the right of the cut device until the blade draws
back. Then you can clear the jammed paper.

If jammed paper gets stuck in the opening of paper path, switch off the printer and pull the jammed paper
backwards carefully. Cut the wrinkled part and re-load roll paper.

If there is little paper shred caught in the print head area, you’d better remove it with a pair of tweezers
carefully.

If there’s still jammed paper that you can not remove and need to do some disassembly, please contact your
technical service or dealer for assistance.
4.4 Maintenance
The printer is designed for a long and reliable life time. But periodic maintenance is recommended in order to
assure error free working. This also would guarantee the good print quality over the life time. It is recommended to
clean the printer once every six months or after 300 hours duty.
Before cleaning, switch off the printer, wait a few seconds and unplug the power cord.

Open the cover and remove the dust, paper shreds and other debris from inside by using a soft vaccum cleaner
or a brush.

In order to remove the dirt, you can wipe clean the machine with a soft cloth dipped in alcohol instead of the
ketone or TEC solvent which may cause damage to the plastic parts. Please be aware that excessive moisture
will lead to the improper functioning of electronic parts.

Clean the platen with soft cloth.
While you are cleaning the printer, in order to avoid short circuit, do not damage or loose the cable or electronic
parts, do not drop metal material inside, such as Paper Clips or Pins.