Caution
Refer to the detection area chart, and select the installation
location. Then, check the actual operation, and adjust the
appropriate area.
Install the unit where the
detection area faces toward a
place intruders may pass
through.
After installation, make sure
to adjust the detection area
and perform sufficient
operation check.
This unit is for wall installation. When installing it on poles,
ceilings, or under eaves, use the specified attachments (sold
separately).
This unit has a rainproof structure. Not a waterproof structure.
Do not hose it directly. Do not use the unit in places subject to
water and/or constant high humidity, such as bathroom. Failure
to follow this could result in malfunction.
In order to maintain the rainproof structure of this unit, install
it in the correct direction. Installing it sideways or upside down
may result in malfunction.
Apply caulking to wiring holes based on the installation wall
material, if necessary, in order to maintain rainproof
performance.
• When the surface in the area is
downward-sloping from the sensor side
ࠉЍ
The detection distance becomes longer
• When the surface in the area is
upward-sloping from the sensor side
ࠉЍ
The detection distance becomes shorter
Mount the unit straight so that it does not look inclined from
the front and side view.
Note that the detection distance depends on the following
factors.
ە
Sensor installation height
(The higher within the rated range, the longer the detection
distance)
ە
Sensor mounting status and surface gradient in the area
Adjust the detection area so
that it does not go beyond
the site.
(Unexpected objects may be
detected)
4
DETECTION AREA
’
P
’
P
’
P
’
P
’
P
’
P
’
P
’
P
’
P
’
P
’
P
’
P
”
P
’
P
’
P
’
P
’
P
’
P
’
P
’
P
’
P
’
P
’
P
’
P
0
&(17(5=21(
’
P
0
&(17(5=21(
’
P
’
P
0
&(17(5=21(
0
&(17(5=21(
’
(5m)
’
P
’
(15m)
’
(5m)
’
P
’
(15m)
’
(5m)
’
P
’
(15m)
’
(5m)
’
P
’
(15m)
Normal Operation
Side view
Top view
〈
Low position mode
〉
Specialized Operation
〈
Pet mode
〉
〈High density mode〉
〈
Hight position mode
〉
