11
11
SPECIFICATIONS
Model
Triple mirror passive sensor
Model number
PIR-T15WE(W)
PIR-T15WE(G)
Detection system
Passive infrared
Detection area
Wide angle (80°) detection
Detection distance: 49
’
(15m), 108 rays (54 pairs)
Power supply
9 to 28V DC (non-polarity)
Current consumption
Max. 40mA
Alarm output
Contact method
: Dry semi-conductor contact, N.C./N.O. selectable
Contact operation : One-shot operation when detecting intrusion
Continuous output in the event of cover monitor error
Continuous output in the event of alignment position error
Continuous output in the event of self diagnosis error
Continuous output in the event of power voltage error
Continuous output in the event of long-term diagnosis error
Contact rating
: 24V (AC/DC) 0.25A (resistive load)
(built-in contact protective resistor 3.3
Ω
)
External output
Contact method
: Dry semi-conductor contact N.O.
Contact operation : One-shot operation/Off delay operation selectable when
detecting intrusion
Contact rating
: 24V (AC/DC) 0.25A (resistive load)
(built-in contact protective resistor 3.3
Ω
)
Tamper output
Contact method
: Dry mechanical contact, N.C.
Contact operation : Continuous output
Contact rating
: 24V (AC/DC) 0.1A (resistive load)
(built-in contact protective resistor 3.3
Ω
)
Alarm LED
Red LED : Blinks* during warm up
Lights up* when detecting intrusion
Continuously blinks in the event of cover monitor error
Continuously lit in the event of alignment position error
Continuously blinks in the event of self diagnosis error
Continuously lit in the event of power voltage error
Continuously blinks in the event of long-term diagnosis error
(*ON/OFF selectable using the mode selector)
Memory LED
Red LED : Blinks for 3 minutes during memory display, Auto reset operation either
of continuous lighting for 47 minutes or blinking for 50 minutes selectable
(Blinks to lights/blinks, ON/OFF selectable using the mode selector)
Functions
Sensitivity selection
Operation mode selection
Alarm memory LED
Self diagnosis
Low voltage monitoring
Temperature compensation
LED area checker
Environmental adjustment
Creep zone detection
Walk test mode
Near area cancellation
Long-term diagnosis
Installation height
6.6
’
to 20
’
(2.0 to 6.0m) (varies depending on the operation mode)
• Low position mode : 6.6
’
to 9
’
(2.0 to 2.7m)
• High position mode : 9
’
to 11.5
’
(2.7 to 3.5m)
• Pet mode
: 8.3
’
to 10
’
(2.5 to 3.0m)
• High density mode : 6.6
’
to 20
’
(2.0 to 6.0m)
Area angle adjustment range
Horizontal direction :±45° (in 5° steps)
Vertical direction
:17° (no stage adjustment)
Ambient temperature range
-25 to +55˚C (no condensation and freezing)
Mounting position
Indoor/outdoor wall surface
* Can be mounted on poles and ceilings (or under eaves) using optional accessories
IP rating
IP55
Connections
Terminals (M2.6 self up terminal)
Weight
Approx. 600g
Appearance
Body:Resin (white), Window:Resin (white)
Body:Resin (gray), Window:Resin (white)
Front & back tamper
