background image

COPY

‑A2‑

Nov./29/ 12

 

This Kit is designed for closed course competition purposes only. So please do not drive on a public road after the installation of this Kit.

 

Before starting the installation, make sure the engine and muffler are cool at below 35 degrees Celsius. (Otherwise, you will burn you.)

 

Prepare right tools for the work. (Otherwise, the installation with improper tools could cause breakage of parts or injuries to you.)

 

As some products and frames have sharp edges or protruding portions, please work with your hands protected. (Otherwise, you will suffer injuries.)

 

Always use new gaskets, seals and the like. The continued use of the worn or damaged ones will cause engine trouble.

The following show the envisioned possibility of injuries to human bodies and property damage as a result of disregarding the following cautions.

CAUTION

 

Those who are technically unskilled or inexperienced are required not to do the work. (Improper installation because of insufficient skill or knowledge could lead to parts breakage and subsequently to accidents.)

 

Before doing work, place the motorcycle on level ground to secure your motorcycle for safety's sake. (Otherwise, your motorcycle could overturn and injure you while you are working.)

 

Always start the engine in a well-ventilated place, and do not turn on the engine in an airtight place. (Otherwise, you will suffer from carbon monoxide poisoning.)

 

As gasoline is highly flammable, never place it close to fire. Make sure that nothing flammable is near the gasoline. (Otherwise it may cause a fire.)

 

Tighten to a specified torque using a torque wrench. (Otherwise, improper tightening may cause the bolts or nuts to get damaged or come off, leading to accidents.)

 

Never use the parts unspecified by us. (This may lead to parts breakage and consequent accidents)

 

If you find damaged parts when checking and performing maintenance of your motorcycle, do not use these parts any longer, and  replace them with new ones.

  

(The continued use of these damaged parts as they are could lead to accidents.)

 

When you notice something abnormal with your motorcycle while riding, immediately stop riding and park your motorcycle in a safe place to check what has gone wrong.

  

(Otherwise, the malfunction could lead to accidents.)

 

Carry out inspection and maintenance of your motorcycle correctly according to the instructions and guidelines in the service manuals. (Use TAKEGAWA-recommended fuel and engine oil.)

 

Fuel must always be high-octane gasoline. (Otherwise, troubles such as engine knocking may cause accidents.)

 

When driving a bike, a driver must always wear a helmet securely. Otherwise, the driver is likely to be subject to death or serious injury in an accident.

WARNING

The following show the envisioned possibility of human death or serious injuries to human bodies as a result of disregarding the following warnings.

Read all instructions first before starting the installation.

We do not take any responsibility for any accident or damage whatsoever arising from the use of this product not in conformity with the instructions in this Manual.

While working on this product, be sure to proceed with the proper work in accordance with the instructions.

Be sure to prepare the genuine service manual of the compatible models and work as instructed. The service and repair information contained in this installation instructions and the genuine service manual are intended for

use by qualified, professional technicians.

Be sure that any person who attempts service or repairs without the proper experiences, tools and equipment ask specialty shops or professional mechanics.

We shall be held free and harmless from any and all liabilities or claims for any defects of the parts/the product after installation, and use, and/or any other products/parts.

Do not use other manufacture’s ignition parts, or it will cause the failure.

The necessary parts for this kit should be all TAKEGAWA-recommended parts. Always use our recommended parts.

Use TAKEGAWA-recommended fuel and engine oil.

Do not keep engine running in idle position for long period of time. It exceeds engine temperature, which cause the damage of the engine.

Содержание DESMO TWINCAM 4V




















Отзывы: