COPY
‑B5‑
Nov./29/ 12
◎
About Optional Clutch Parts:
After removing a thermostat hole cap, install the
thermo unit.
※
For details, see the Instruction Manual for the
thermo unit.
※
The thermo unit alone does not function.
(Installation of thermo unit)
（
Oil Cooler Installation
）
●
In case a thermo unit is to be installed:
１．
Install a thermo unit.
２．
Unfasten two oil plug bolts, and install an adapter
suitable for the kind of hose you will use. Then
connect the hose.
※
Please see the instruction manual for the thermo
unit.
※
Please see the instruction manuals for the oil
cooler kit and the adapter.
Rubber hose
Slim-line hose
Allegri’s hose
ＩＮ ＯＵＴ
Thermostat hole cap
Oil hole plug
In case an oil cooler is not installed:
NEVER install a thermo unit or an oil hole plug. And in
case the thermo unit and / or an oil hole plug is
installed, DO be sure to remove it or them.
◎
Relevance of Front Fork and Tire
о
Clamp the top bridge at the highest point of the
straight portion to avoid the tapered portion of
front fork.
※
Before installing, make sure that no
interference occurs when the front fork is fully
bottomed.
○φ
30 Upright Front Fork
Tapered portion
Caution
：
NEVER install a
thermo unit or an oil
hole plug if you do
not connect an oil
hose to the clutch
cover.
There is a
possibility that the
engine is damaged
due to the oil
passage blockage.
Caution
：
There is a
possibility that the
engine is damaged
because the oil
passage will be
blocked when the
thermo unit or an oil
hole plug is installed.
●
In the case of not installing the thermo unit
１．
Detach the thermostat hole cap, and fit an oil hole
plug (option) into the oil hole.
２．
Apply engine oil to the O-rings of the thermostat
hole cap, and tighten the hole cap to the
specified torque.
Caution : Be sure to follow the specified torque.
Torque: 13 N
・
m (1.3 kgf
・
m)
３．
Unfasten two oil plug bolts, and fit an adaptor to
match the hose to be used. And connect the hose.
※
For details, see the Instruction Manuals for an Oil
Cooler Kit and an Adaptor.
