TAKE-A-LABEL TAL-3000R, Руководство по эксплуатации

Страница: 8 / 41

Page 2.1
M
M
a
a
c
c
h
h
i
i
n
n
e
e
S
S
t
t
a
a
r
r
t
t
u
u
p
p
1. Unpack the TAL-3000R system from the shipping container.
2. Inspect the labeler for damage. If you see any damage, please notify the shipping
company and TAL before setting the labeler up and using it.
3. Set labeler on an appropriate stand or table.
4. Plug the labeler directly into a 110 VAC 15 AMP (GROUNDED) outlet. Do not
use an extension cord.
Note: Extension cords may result in improper labeler operation and are not
recommend by TAL.
4. Install the label roll and thread the labeler. (See page 2.2 )
WARNING: To avoid inadvertent operation, always thread the machine with the
power switch in the off position.
5. Adjust the position of the Round Product Carrier. ( See page 2.4-2.5 Product
Carriage Adjustment).
6. Turn the power switch on. The red LED in the switch will light when the power is
on.
Label A/-
7. Using the LABEL A/- dial, adjust the label advance position. (See page
2.8 Label Position).
8. Adjust the tension of the label web tensioner see. (See page 2.3 Label Threading
and Tensioning).