12
・
Depends on the operating environment or conditions, the water discharge amount may change significantly
when controlling the hot water temperature. This phenomena occurs when the hot water temperature
exceeds the recommended values (60
℃
to 80
℃
), there is significant difference in the water supply or
hot-water supply pressure, or multiple devices are used at the same time – it is not a product failure.
・
The temperature of discharged water and the preset temperature may differ depending on the operating
environment or conditions.
(The product is designed so that the temperature of the discharged water will be about 40
℃
when the
temperature control knob is turned toward the H position and locked in that position.)
This phenomena occurs when the hot water temperature exceeds the recommended values (60
℃
to 80
℃
),
there is significant difference in the water supply or hot-water supply pressure, or multiple devices are used
at the same time - it is not product failure. The temperature of discharged water may be set at approximately
40
℃
when the temperature of hot water or the pressure of the water/hot water supply is adjusted and the
locking position of the temperature control knob is adjusted.
Note
Caution
・
Return the temperature control knob to an appropriate position after use. Continuing to use the hot
water with the knob in the hot temperature position may cause burns.
・
Using other equipment that shares the same water/hot water supply source at the same time may
cause unstable water temperature. Do not execute any quick operation while adjusting the
temperature.
・
Operate the temperature control knob only after removing metallic objects such as rings and wrist
watches, etc. Failure to follow this instruction may result in contact between the metal and cap of
temperature control knob resulting in flaws or cracks on the plated surface and thereby causing
peeling of the plating.
・
Before using the product, check that there are no flaws, cracks, or peeling of the plated surface of
the temperature control knob. If the plating is peeled off, immediately stop using the product and
contact the nearest dealer or Takara Belmont directly as it may result in personal injury. Continued
operation may result in personal injury.
*For safety reasons, this product is designed so that hot water of approximately 53
℃
or higher is not output.
(Conditions: In the case that the supply pressure of water and hot water are the same, normal water temperature is 20
℃
and hot water temperature is 60
℃
.)
