11
Note
Depends on the environment or condition that it is used in, the product may have the following
conditions. If adjustment or replacement is required, contact the nearest dealer or Takara Belmont
directly.
・
A gushing sound may be emitted from the basin unit. (Adjustment is required.) This sound is due to
water flowing fast through pipes as a result of high water pressure or water volume control, and is
not indicative of a defective product. This gushing sound may be reduced by adjusting the water
pressure.
・
The tap may become stiffer. (Replacement is required.)
This is due to deterioration of packing of movable parts or a lack of grease as a result of aging.
Replacement of the packing or other parts, or a recoating of grease is required.
(available at additional cost)
Caution
1. Turn the temperature control knob in the H or C direction to set the
temperature to an appropriate level.
When turning to the H direction, water becomes warm, and when
turning to the C direction, water becomes cold.
2. To use hot water at high temperature (40
℃
and higher), turn the
temperature control knob in the H direction while holding down the
stop button.
■Adjusting the water temperature
Hot
Cold
Stop Button
Temperature
Control Knob
Arm
Stop Button
When adjusting the water temperature, reduce
the volume of water, point the showerhead away
from the client and check the temperature by
hand. Take care when doing so, as hot water may
come out of the showerhead.
