16
Drain cap
Strainer
Drain housing
■
Strainer
1
2
3
Install the strainer in the drain housing.(
※
Push firmly so as not to float)
Be careful hair does not flow into the
drainage pipe. It will cause the drainage
pipe is clogged.
■
Shower head holder, Faucet handle
Do NOT use sponges as even sponges intended for home use may damage the surface when
used repeatedly.
Do NOT use abrasives, sponges with abrasives, metal scrubbing brushes, nylon scrubbing
brushes, etc., as they may damage the surface.
Do NOT use chlorine-based, acidic, alkaline, or other chemical agents for stubborn dirt as they
may cause separation of plating on the surface.
If there are separation or flaws on the plated surface of the temperature control handle / faucet
handle (resin-plated parts). Your hand may become injured by the separation or the flaws on the
plated surface.
CAUTION
CAUTION
CAUTION
Pull out the strainer located under the drain cap
Remove any hair that has been caught.
Clean the strainer as regularly as possible. Continuing to use the strainer without cleaning can
cause the drain to become blocked with hair, leading to water overflowing and unhygienic
conditions. Try to clean the strainer after each shampoo.
The strainer is a consumable supply. Replace the strainer if it is extremely dirty or the surface has
deteriorated. (available at additional cost)
Wipe clean with a soft, dry cloth. If they are extremely dirty, wipe with detergent diluted with water, and always wipe
them dry.
