Install on a stable areu
Fix the basin vertically on a flat wall.
After installation, check that the basin is securely
fixed.
Failure to follow this instruction may cause the
basin come off the wall,
and crack the basin or be injury.
WARNING
Do NOT lean against the basin.
If you provide any service for the customer
leaning against the basin, the product may fall
down and cause damage to the product or
personal injury.
Wall
Do NOT use hot water (boiling water)
of 140°F or higher.
Using hot water at 140°F or higher may deform or
damage the ceramic basin, the shower head, or
the faucet handle, the neck cushion, the neck
base, the neck fittings, the drain cap, the strainer,
the drain housing.
3
Do NOT get on or hang from the basin.
Do NOT attempt to disassemble or repair the
equipment on your own.
Damage to the product or deformation may be
caused.Failure to follow this instruction may
cause the product fell down,
leading to injury.
Return the faucet to an appropriate
position after using hot water.
●
Return the faucet to an appropriate position after
using hot water. Continuing to use the hot water
with the knob in the hot position may cause burns.
●
Using other equipment that share the same
water/hot water supply source at the same time
may cause unstable water temperature. If multiple
equipment is to be used, move the faucet slowly
to adjust the water temperature.
CAUTION
HOT
Do NOT
Disassemble
Do NOT attempt to repair the unit by
yourself.
Do NOT attempt to disassemble or repair the
equipment on your own. Failure to follow this
instruction may cause the water leak or abnormal
operation, leading to injury.
Safety Precautions
When adjusting the hot water temperature, reduce
the volume of hot water, point the shower head
away from the customer and check the tempera-
ture by your hand.
Take care when doing so, as hot water may come
out of the shower head.
Adjust the temperature of warm water
while checking it by hand.
