26
27
2. Remove the old grip rubber and
replace with new one.
TAIYO ELECTRIC IND.CO.,LTD.
TAIYO ELECTRIC IND.CO.,LTD.
27
Recommended temperature
The lead-free soldering iron should be set at
a low temperature. This slows down carbon-
ization. Lead-free soldering irons have excel-
lent heat recovery. Reducing the tempera-
ture will not affect the work being carried
out. However even at lower temperatures,
flux still carbonizes.
Cleaning tips
During and after use, rub the tip over the
sponge or in and out of the wire pad while
hot to remove the oxidized blacken particles
from the tip. Then, re-tin the tip with a small
amount of solder.
Applying solder
Be careful to keep the solder only in contact
with the solder-coated area of the tip.
Using the soldering iron stand
After purchase, the first time you plug in the
soldering station, or when resting the iron in
the stand during use, leave a coating of sol-
der on the solder-coated area of the tip and
place it into the soldering iron stand. Only
a thin layer of solder is necessary. The tin
surface of a lead-free soldering iron oxidizes
easily. Coating it with solder reduces oxida-
tion levels.
Oxidation starts as soon as the tool is
plugged in and begins to heat. When opera-
tion is completed, tin the solder-coated area
of the tip with solder and unplug it. This
protects the tip from oxidation when it starts
heating up the next time it is in use.
A lead-free soldering iron is more susceptible to oxidation, and it is more difficult to wet the tip
with solder. Flux within the solder adheres to the tip, carbonizes and blackens. This cannot be
stopped. However, if the user follows the instructions for use and maintenance below, the user
will be able to easily wet the tip with solder consistently.
How to use, clean, and maintain the soldering iron
5-4 How to Use, Clean, and Maintain a Lead-Free Soldering Iron
When cleaning, do not at any time allow gasoline, petroleum-based products, penetrating
oils, etc. to come into contact with the plastic parts. They contain chemicals that can damage,
weaken, or destroy plastics.
5-3 Housing Cleaning
Grip
adapter
❶
❷
❸
Screw
Screw
Grip adapter
The handpiece will come apart
when the rubber is removed.
Please hold it together.
NOTE
) Hold the handpiece together with
the other hand so it does not come apart.
NOTE
) Hold the handpiece together with
the other hand so it does not come apart.
1. Remove the screw. Turn and pull the
grip adapter to remove the grip rubber.
5-2 How to Change the Grip Rubber
Содержание RX-802AS
Страница 25: ...TAIYO ELECTRIC IND CO LTD 25 ...