taiyo RX-802AS Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 32

background image

TAIYO ELECTRIC IND.CO.,LTD.

TAIYO ELECTRIC IND.CO.,LTD.

8

3

Rules for Safe Operation

1. DO NOT USE IN DANGEROUS ENVIRONMENTS.

Do not use the soldering station in damp or wet locations or expose it to

external environmental conditions, particularly rain. Never use it in an explosive
atmosphere. The heat from the heater can ignite fumes. Be sure that the work area
is well ventilated.

2. KEEP CHILDREN AND BYSTANDERS AWAY FROM THE SOLDERING STATION.

Do not let bystanders touch the soldering station. All bystanders should be kept a

safe distance from the work area.

3. USE FOR THE RIGHT JOB.

Your soldering station is an electrical tool used to solder parts and melt solder. Do

not use the soldering station for any other purpose. For example: The soldering
station should never be used to warm water or other liquids.

4. WEAR PROPER APPAREL, SAFETY GLASSES, GLOVES AND MASK.

Do not wear loose clothing (such as a necktie). Tie up long hair. Clothing or hair

can burn on contact with the tip or surrounding heated parts.

5. CONNECT TO THE SPECIFIED AC POWER SUPPLY.

The power voltage for this soldering station is indicated at the back of the control

unit. Never plug the soldering station into any other voltage.

6. DO NOT ABUSE THE POWER CORD AND INSPECT IT PERIODICALLY.

Never carry your soldering station by its power cord or yank the power cord to

disconnect it from the receptacle. Keep the power cord away from heat, oil and
sharp edges

.

WARNING

The

RX-802AS

is an anti-static model. Be sure to

properly ground the soldering station using a grounded
receptacle to prevent electric shocks and anti-static. If
it is not properly grounded, electric shocks will occur. As
the soldering station uses conductive materials, please
be careful not to touch any electrical power source or a
serious injury will result.

«
...
6
7
8
9
10
...
»

Содержание RX-802AS

































Отзывы:

Нет отзывов

Похожие инструкции для RX-802AS

BGA-3590 Series

Бренд: Metcal Страницы: 51

Бренд: Velleman Страницы: 16

Бренд: Xytronic Страницы: 11

Бренд: jbc Страницы: 8

Бренд: Weller Страницы: 55

Бренд: Goot Страницы: 8

Бренд: Goot Страницы: 16

Бренд: Goot Страницы: 36

Бренд: Fixpoint Страницы: 44

Бренд: Topex Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды