Tait TM9315 Скачать руководство пользователя страница 53

Страница: 53 / 62

Tait Software Licence Agreement 53

“Person”

means any individual,

partnership, corporation, association,

joint stock company, trust, joint

venture, limited liability company,

governmental authority, sole

proprietorship, or other form of legal

entity recognized by a governmental

authority.

“Security Vulnerability”

means any

flaw or weakness in system security

procedures, design, implementation,

or internal controls that if exercised

(accidentally triggered or intentionally

exploited) could result in a security

breach such that data is compromised,

manipulated, or stolen, or a system is

damaged.

“Software”

(i) means proprietary

software in executable code format,

and adaptations, translations, de-

compilations, disassemblies,

emulations, or derivative works of

such software; (ii) means any

modifications, enhancements, new

versions and new releases of the

software provided by Tait; and (iii) may

contain one or more items of software

owned by a third-party supplier. The

term "Software" does not include any

third-party software provided under

separate license or not licensable

under the terms of this Agreement.

“Source Code”

means software

expressed in human readable

language necessary for

understanding, maintaining,

modifying, correcting, and enhancing

any software referred to in this

Agreement and includes all states of

that software prior to its compilation

into an executable programme.

“Tait”

means Tait Limited and

includes its Affiliates.

ECTION

2 SCOPE

This Agreement contains the terms

and conditions of the license Tait is

providing to Licensee, and of

Licensee’s use of the Software and

Documentation. Tait and Licensee

enter into this Agreement in

connection with Tait delivery of certain

proprietary Software and/or products

containing embedded or pre-loaded

proprietary Software.

ECTION

3 GRANT OF

LICENSE

3.1. Subject to the provisions of this

Agreement and the payment of

applicable license fees, Tait grants to

Licensee a personal, limited, non-

transferable (except as permitted in

Section 7), and non-exclusive license

to use the Software in executable code

form, and the Documentation, solely in

connection with Licensee's use of the

Designated Products for the useful life

of the Designated Products. This

Agreement does not grant any rights to

source code.
3.2. If the Software licensed under this

Agreement contains or is derived from

Open Source Software, the terms and

conditions governing the use of such

Open Source Software are in the Open

Source Software Licenses of the

Agreement. If there is a conflict

between the terms and conditions of

this Agreement and the terms and

conditions of the any applicable Open

Source Software Licenses, the terms

and conditions of the Open Source

Software Licenses will take

precedence. For information about

Open Source Components contained

in Tait products and the related Open

Source licenses, see:

http://support.taitradio.com/go/

opensource

ECTION

4 LIMITATIONS ON

USE

4.1. Licensee may use the Software

only for Licensee's internal business

purposes and only in accordance with

the Documentation. Any other use of

the Software is strictly prohibited.

Without limiting the general nature of

these restrictions, Licensee will not

make the Software available for use by

Содержание TM9315































































Результаты поиска

Содержание TM9315

Отзывы:

Похожие инструкции для TM9315

Бренды по названию

Популярные бренды

Tait TM9315, Руководство пользователя

Результаты поиска

Содержание TM9315

Отзывы:

Похожие инструкции для TM9315

Бренды по названию

Популярные бренды