Tait TM9315 Скачать руководство пользователя страница 6

Страница: 6 / 62

US 640974, US 640977, US 698339, US 702666, US 7758996,

US 8902804, US 9107231, US 9504034, US 9559967.
This product may also be made under license under one or

more of the following patents:

- US7203207, AU2004246135, CA2527142, GB2418107,

HK1082608, MY134526, US8306071

- US7339917, AU2004246136, CA2526926, GB2418812,

MY134217

- US7499441, AU2005262626, CA2570441, GB2430333,

JP4690397, NZ551231, KR100869043, RU2351080,

BRP10512052, MXPA06015241

- US 7200129, AU2005226531, CA2558551, CN1930809,

GB2429378, JP4351720, BRP10508671, NZ549124,

KR848483, RU2321952
The AMBE+2™ voice coding Technology embodied in this

product is protected by intellectual property rights including

patent rights, copyrights and trade secrets of Digital Voice

Systems, Inc. This voice coding Technology is licensed solely

for use within this Communications Equipment. The user of

this Technology is explicitly prohibited from attempting to

decompile, reverse engineer, or disassemble the Object

Code, or in any other way convert the Object Code into a

human-readable form.

Environmental responsibilities

Tait Limited is an environmentally responsible company

which supports waste minimization, material recovery and

restrictions in the use of hazardous materials.
The European Union’s Waste Electrical and Electronic

Equipment (WEEE) Directive requires that this product be

disposed of separately from the general waste stream when

its service life is over. For more information about how to

dispose of your unwanted Tait product, visit the Tait WEEE

website at

www.taitradio.com/weee

. Please be

environmentally responsible and dispose through the original

supplier, or contact Tait Limited.
Tait Limited also complies with the Restriction of the Use of

Certain Hazardous Substances in Electrical and Electronic

Equipment (RoHS) Directive in the European Union.
In China, we comply with the Measures for Administration of

the Pollution Control of Electronic Information Products. We

will comply with environmental requirements in other markets

as they are introduced.

Содержание TM9315































































Результаты поиска

Содержание TM9315

Отзывы:

Похожие инструкции для TM9315

Бренды по названию

Популярные бренды

Tait TM9315, Руководство пользователя

Результаты поиска

Содержание TM9315

Отзывы:

Похожие инструкции для TM9315

Бренды по названию

Популярные бренды