background image

 Operating in trunked mode  43

 

Making a preset call

The preset calls programmed for your radio may be to 
other radios, to PABX extensions or to PSTN 
numbers, or to perform a special function using a 
trunked call string (such as changing the current 
trunked network).

Depending on how your radio is programmed, you 
may be able to use a function key to set up a preset 
call. Alternatively, calls may be initiated by using the 
scroll keys to select a preset call ID and then pressing 
the PTT.

The active trunked network may be changed using a 
trunking call string that is programmed into a preset 
call entry. This preset must be selected using the 
scroll keys, before pressing the PTT to change the 
active network.

  

About emergency operation

In an emergency you may be able to summon help by 
sending an emergency call. After making the call, your 
radio may be programmed to enter emergency mode. 
While emergency mode is active, your radio may 
cycle between receive and transmit, so that your 
dispatcher or the called party can hear any activity 
near your radio.

On most networks, an emergency call takes 
precedence over other call types, and existing calls 
are cleared down so that the emergency call can 
proceed.

To make an emergency call from your radio, you may 
be able to either:

make a preset emergency call,

use a function key programmed for emergency 
mode.

Содержание TM9315































































Отзывы: