Tait TM9315 Скачать руководство пользователя страница 5

Страница: 5 / 62

Copyright and trademarks

All information contained in this document is the property of

whole or in part, be copied, photocopied, reproduced,

translated, stored, or reduced to any electronic medium or

machine-readable form, without prior written permission from

Tait Limited.
The word TAIT and the TAIT logo are trademarks of Tait

Limited.
All trade names referenced are the service mark, trademark

or registered trademark of the respective manufacturers.

Disclaimer

There are no warranties extended or granted by this

document. Tait Limited accepts no responsibility for damage

arising from use of the information contained in the document

or of the equipment and software it describes. It is the

responsibility of the user to ensure that use of such

information, equipment and software complies with the laws,

rules and regulations of the applicable jurisdictions.

Enquiries and comments

If you have any enquiries regarding this document, or any

comments, suggestions and notifications of errors, please

contact your regional Tait office.

Updates of manual and equipment

In the interests of improving the performance, reliability or

servicing of the equipment, Tait Limited reserves the right to

update the equipment or this document or both without

prior notice.

Intellectual property rights

This product may be protected by one or more patents or

designs of Tait Limited together with their international

equivalents, pending patent or design applications, and

registered trade marks: NZ 409837, NZ 409838, NZ 415277,

NZ 415278, NZ 530819, NZ 534475, NZ 547713, NZ 577009,

NZ 579051, NZ 579364, NZ 586889, NZ 610563, NZ 615954,

NZ 700387, NZ 708662, NZ 710766, NZ 711325 , NZ 726313,

NZ593887, AU 2015215962, AU 339127, AU 339391,

AU2016259281, AU2016902579, EU 000915475-0001,

EU 000915475-0002, GB 2532863, US 14/834609 Div. no 1,

US 15/346518 Div.no 2, US 15/350332, US 15/387026 Div.,

US 20150085799, US 20160044572, US 20160057051,

Содержание TM9315































































Результаты поиска

Содержание TM9315

Отзывы:

Похожие инструкции для TM9315

Бренды по названию

Популярные бренды

Tait TM9315, Руководство пользователя

Результаты поиска

Содержание TM9315

Отзывы:

Похожие инструкции для TM9315

Бренды по названию

Популярные бренды