TB9400 Specifications Manual
Compliance Standards
45
© Tait Limited July 2017
RF and EMC
Compliances
The following table shows which variants of the TB9400 have been tested
and approved to the listed standards.
A tick indicates the compliance has been received, a date indicates when
the compliance is expected to be received, and a blank cell indicates there
are currently no plans to apply for this compliance.
B3 Band
H Band
K4 Band
50W
100W
Receive-
only
50W
100W
Receive
-only
50W
100W
Receive-
only
RF - P25
Pha
se 1
CFR Title 47 Parts 15 and 90 (FCC)
✓
✓
✓
✓
✓
✓
✓
✓
CFR Title 47 Parts 22 and 74 (FCC)
✓
✓
––
a
––
a
P25 CAP (P25-CAB-CAI_TEST_REQ March 2010)
✓
✓
✓
✓
✓
✓
RSS-119 (IC)
✓
✓
––
b
✓
✓
__b
✓
✓
––
b
EN 300 113-1, EN 300 113-2 (ETSI)
✓
✓
✓
✓
✓
✓
AS/NZS 4768 Appendix A
✓
✓
✓
✓
✓
✓
ANATEL Resolution 554
✓
✓
––
c
✓
––
c
RF
- P2
5
Phase
2
CFR Title 47 Parts 15 and 90 (FCC)
✓
✓
✓
✓
__e
✓
✓
CFR Title 47 Parts 22 and 74 (FCC)
✓
✓
RSS-119 (IC)
✓
✓
✓
✓
✓
✓
EN 300 113-1, EN 300 113-2 (ETSI)
✓
✓
✓
✓
AS/NZS 4768 Appendix A
✓
✓
✓
✓
ANATEL Resolution 554
✓
✓
✓
RF - Ana
log
CFR Title 47 Parts 15 and 90 (FCC)
✓
✓
✓
––
d
––
d
✓
✓
✓
✓
EN 300 086-1, EN 300 086-2 (ETSI)
––
d
––
d
––
d
––
d
––
d
__d
AS/NZS 4295 Appendix B
––
d
––
d
––
d
––
d
––
d
__d
EMC
CFR Title 47 Part 15 (FCC) / RSS-Gen (IC)
✓
✓
✓
✓
✓
✓
✓
✓
✓
EN 301 489-1, EN 301 489-5 (ETSI)
✓
✓
✓
✓
✓
✓
ANATEL Resolution 442
✓
✓
––
c
✓
––
c
a. Not applicable.
b. IC certification of the test report is not required for receive-only base stations. However, the IC labelling requirement must be complied with, as
described in Notice 2012-DRS0126 paragraph 2.2.2.1.
c. Not required for receive-only base stations.
d. Date to be confirmed.
e. Subject to Part 15 only.
