S
handong Taishan Sports Equipment Co., Ltd
Web: www.taishansports.cn
2)
Fix
8-bracket III
,
9-bracket IV
,
10-bracket V
,
13-slop bracket
and
14-run-up
bracket
together as per below figure by using tools (
23-17 wrench, 16-flat
washer 10, 18-lock nut, 21-hex bolt
). (When assembling screws and nuts, use
tool 28-special wrench to adjust the position for easy installation)
Notes: 9pcs of
9-bracket IV
are middle placed, install the higher end only when
assemble the
8-bracket III
.
3)
Lay the
5-flexible layer
on the performance area.
4)
As per below Figure, lay the
3-performance area layout
and
4-run-up area
layout
in good order, then use
26-blue 100 Velcro
to connect the 2 layouts. Use
27-white 50 Velcro
to make 3 rule lines on the
3-performance area layout
(see
Figure 1
for the size of rule lines)
5)
As per below Figure, cross tie the
25- Blue 50 Velcro
on the support brackets,
then stretch upward to attach it on the surface of layout. Note: The support
brackets of performance area should be all been tied up. The support brackets of
run-up area should be tied up by every other unit.
6)
Attach
1-skirt
on the two side edges.
7)
Middle place the
2-landing area
on the left end of the tumble track as per below
Figure
5
