Tainet T-336Cx, Руководство пользователя

Страница: 72 / 109

Chapter 4 General Information and Features
63
4.17 PASSWORD AND CALLBACK FUNCTIONS
4.17.1 Dynamic Password/CallBack:
Special Control codes below can be utilized to assign Dynamic Login Password or
Call Back Phone Number (work with both AT command dialing string and front
panel dialing operation):
„
‘
<
’ +
<
string
>
: Control code for Dynamic Password assignment. <string> after
‘
<
’ will be sent to ANS modem as Password. It overrides the setting in ‘Send
Password’, but will be ignored if ‘Send Password’ = ‘Off’.
„
‘
>
’ +
<
string
>
: Control code for Dynamic Call Back Number assignment.
<string> after ‘
>
’ will be sent to ANS modem as the desired Dial Back
Number. After ANS modem authenticated ORG modem, it will call back with
<string>. This Control code overrides the setting of ‘Call Back No.’ in ORG
modem. If ‘Send Password’ = ‘Off’ on ORG modem or ‘Call Back No.’ =
‘Disable’, this character will be ignored.
4.17.2 Extension Code for Stored Phone Numbers (‘+’+<char>):
If the last two digits of Stored Phone Number is ‘+’+<char>, modem will dial
current number and continue on with specific stored number as designated by
<char>. <char
>
is the stored phone number order(#n). (any other characters after
<
chart
>
will be omitted)
For example: A5 will force the modem to dial 1234 and the number
stored in #5. Total number in a dial string should not exceed 250 characters. The
‘+’ Code should not appear in Call Back Number or it will be ignored when ANS
modem calling back.
4.17.3 Additional Information:
„
Front Panel LCD will show “Call Back” to indicate it is under Call Back mode:
When ANS modem is waiting under ‘Call Back Timer’ to call back.
„
When ORG modem dial with Dynamic Call Back Control Code “
>
”+
<
string
>
and sending Password for authentication(no matter send with ‘Send
Password’ or Dynamic Password): ANS modem will save received
Password, and send it back while Call Back link was built. And it overrides
the setting in its own ‘Send Password’.
„
When modem is under Call Back operation, VO/DA can be used to cancel
procedure.
„
When applying Password or Call back Security function, ‘PROTOCOL’
setting in both modems should be identical.