Tainet T-336Cx, Руководство пользователя, Страница: 74 / 109

Chapter 4 General Information and Features
65
4.18 Intelligent Dial Polling
Settings:
When under Dial Modifiers setting, use “@” symbol for intelligent dial polling
instead, but “=” is still “wait for quiet answer (silence).
Operations:
If a “@” symbol included in the Telephone Number #0- #9, also abnormal
disconnection, i.e. jumping back to Idle before connecting occurred (exception:
when Originate user press the VO/DA button), then dialing will be proceeded from
the telephone number with a “@” symbol and stop at the one without a “@”
symbol.
For instant: Tel #0: 12345678@
Tel #1: 23456789@
Tel #2: 34567890
If dialing starts from #0, it will automatically dial from #0, #1 to #2 and stops at #2.
Note: if user has set Dial To Dial function to “On”, then the dialing will keep dialing
#2.
Also reminds that:
„
If user is using ATDTxxxx@ command to dial, then it will start the dial polling
from Telephone Number #0.
„
If the setting of DTR is “DTR off to on (108-1)”, then the “@” symbol (function)
needs to be set included in #0 in order to start the dial polling function after
the initial dialing.
„
If the setting is “Dial to Dial on”, then the “@” symbol (function) needs to be
set included in the Backup Tel in order to start the dial polling function after
the initial dialing.
„
If the dial polling number followed by an “Empty” phone number, then the
dialing will cycle back to #0. (However, if the Tel #0 is an empty number,
then the dial polling will terminate.)
„
When dial polling to #9 (or #5 when the Country Code is Beijing Tainet), it will
return back to #0.
„
When during the “Dial Backup” (Leased to Dial), then the “@” function will
not be working.
„
The dial polling will terminate when a connection has been made.
„
Before the connection, user at Originate can press the VO/DA key to
terminate the dial polling.