Tainet T-336Cx, Руководство пользователя, Страница: 52 / 109

Chapter 3 Front Panel and Menu Tree
43
operation, required settings can be made for
the next operation when the modem is power
on.
Default profile: AT&Fn&W Load factory profile #0..#9.
0: AS-DL-AT-
AUTO AT&F0&W /Async, dial line, AT command, Auto reliable
mode, V34 Adapt, this mode is most
applicable to BBS networks.
1: AS-DL-AT-
NONE AT&F1&W /Async, dial line, AT command, direct mode
and V34 Adapt, this is a typical operating
mode for Hayes compatible modem
2: SY-DL-V25-
NONE AT&F2&W /Sync, dial line, V.25bis command, V34 Adapt,
this mode is applicable to IBM AS-400 series
sync dial networks.
3: AS-2L-ANS-
V34 AT&F3&W /Async, 2W leased line, answer, applicable to
the most of the async, non-compressed 2 wire
leased line.
4: AS-2L-ORG-
V34 AT&F4&W /Async, 2W leased line, originate, applicable
to the most of the Async, non-compressed 2
wire leased line.
5: SY-2L-ANS-
V34 AT&F5&W /Sync, 2W leased, answer, applicable to the
most of the Sync, 2 wire leased line.
6: SY-2L-ORG-
V34 AT&F6&W /Sync, 2W leased line, originate, applicable to
the most of the Sync, 2 wire leased line.
7: SY-4L-ANS-
V34 AT&F7&W /Sync, 4W leased, answer, applicable to the
most of the Sync, 4 wire leased line.
8: SY-4L-ORG-
V34 AT&F8&W /Sync, 4W leased line, originate, applicable to
the most of the Sync, 4 wire leased line.
9: ASY-2L-ANS-
AUTO AT&F9&W /Async, 2W leased line, answer, applicable to
the most of the async, compressed, 2 wire
leased line.
SAVE AT&Wn
(n=0-9)
Store the revised configuration in the user-
defined configuration profile.
User Profile#0..#9 \/Store in the nth group in the user's
configuration profile. Usually, the 0th group is
provided for the working area, setting store in
this area or load the factory default will
change the set parameters for next power-on
operation. If you want the nth group is to be
used for the next power-on working profile,
operate the load user profile #n.
Front Lock ATS29=n Front panel lock control.