Tainet T-336Cx, Руководство пользователя

Страница: 38 / 109

Chapter 3 Front Panel and Menu Tree
29
1959 Hz. (This value is only available when
operating on V.34).
TX FREQ =
XXXXHz AT%S Indication of the carrier frequency of transmitted
signal. (This value is only available when
operating on V.34).
TX SPEED =
XXXXbps AT%S Indication of the DCE speed of transmission.
RX SPEED =
XXXXbps AT%S Indication of the DCE speed of receiving.
TX POWEROFF =
XdB AT%S Indications of a reduction of transmit power
level. For examples: TX PowerOff = 6dB means
the transmit power level is requested to reduce 6
dB by the remote modem. (This value is only
available when operating on V.34).
TR, MR, RS, CS,
CD, T AT%S Indications of the RS-232 interface lead status.
3.5.2 DIAL MENU
Item Name Command Description
Dial a Number
\#0...#9
ATDSn Dial out a preset telephone number #n(n=0..9).
This function can interact with the auto redial
function or dial line auto establishment function.
Edit a Number
\#0...#9
AT&Zn = xx Edit telephone number #n (n=0..9) for up to 20
digits each group.If the "@" is included inside
the number and auto-redial is ON, then it will
redial next number after no answer until the
number without "@". If it is still unsuccessful
then retirn to the first number. Up to 10
intelligent redial groups is allowed. #1 xxx@
→
#2 xxx@ ...
→
#n xxx
→
#1 xxx@
→
...
Ring Times ATS0=n Auto answer activates when detected ring count
= n (default=1).
**If 108.1 (DTR ON Auto Dial/Ans) is used for