Tainet IPBX 230, Руководство пользователя

Страница: 66 / 107

Chapter 4 IP PBX Configuration
64
Table 4.6-1 SIP Trunk Configuration Settings
Field Description
Trunk Identifier A unique number consisting of digits only. Usually give
the phone number issued by the ITSP for consistency.
Description Arbitrary description information.
Dynamic Peer Select if the trunk is a passive trunk which means the
registration will be from a dynamic remote peer. Typical
application is to accept registration from an IP PBX at a
remote site with dynamic IP address. Once the remote IP
PBX registers, calls from local to remote can be made
reversely over the trunk.
SIP Proxy
SIP Proxy Port
Specify IP address (or fully qualified domain name) and
UDP port of the remote SIP proxy, which usually refer to
the SIP server on the ITSP side.
Auth. Name Specify the name for authentication if different to the
Trunk ID.
Auth. Password Give the password used for authentication on the remote
SIP proxy or registrar. Usually this is given by the ITSP.
Registration
Required
Select if registration to a registrar is required to activate
the trunk. This is true for a remote IP PBX or an ITSP
account, however, may be not required in case of a SIP
gateway.
SIP Registrar
SIP Registrar Port
Specify IP address (or fully qualified domain name) and
UDP port of the remote SIP registrar, which usually refer
to the SIP server on the ITSP side (same as proxy).
Outbound
Routegroup
6
Select a routegroup to associate routes with this trunk.
Outbound calls match included route patterns could
employ this trunk to hop onto a remote SIP domain.
There may not be any appropriate routegroup to select
initially. One can come back later to revise it, once the
expected routegroup has been added.
DID of Extension When enabled DID, clicks an extension in the list to be an
unconditional destination for incoming calls to this trunk.
Or click bynumber and then enter configurations in DID
6
Please refer to 0 for details.