Tainet IPBX 230, Руководство пользователя

Страница: 26 / 107

Chapter 2 System Configuration
24
2.5 LAN Routing
To enable static routing among LAN subnets, enter network information and the IP
address of the corresponding gateway in the IP PBX’s LAN. It is important to
assure that the given gateway IP address sits in the IP PBX’s LAN. Each subnet
requires an entry even multiple subnets share the same gateway, unless masking
does the same. Examples are adding IP Route IDs net1 and net2 with parameters
192.168.128.0/255.255.255.0, 192.168.129.0/255.255.255.0, and shared gateway
192.168.1.254 respectively. Or, IP Route ID net1n2 with 192.168.128.0/
255.255.254.0 and gateway 192.168.1.254 would do the same. Added routes
enable routing immediately after clicking ADD , however, the IP PBX Service
needs to be restarted to regard calls from designated LAN subnets as LAN traffic.
2.5.1 Add a Route
Enter the Route ID, Subnet, Netmask, and Gateway.
Click ADD.
The newly added route will show in the IP Route ID .
2.5.2 Edit a Route
Edit the information in a row.
Click APPLY in the row to update the information.
2.5.3 Delete a Route
Select a Route ID.
Click DEL .
The deleted Route ID will disappear from the IP Route ID column.