Tainet IPBX 230, Руководство пользователя

Страница: 42 / 107

Chapter 3 Service Configuration
3.4 DHCP Service
Select Service -> DHCP Service to view the current status of the DHCP Service.
You can enable or disable the DHCP Service at any time.
Note:
If the IP PBX was shut down abnormally, Select Service ->
DHCP Service and click APPLY, or Go to Service -> IP PBX
Service, and click RESTART to active the DHCP service.
3.4.1 Enable DHCP Service
Click Enable, choose the main interface offering addresses, and then APPLY to
configure DHCP settings.
3.4.1.1 Add DHCP Range
Click CLEAR.
Enter a pool name (must have an alphabet initial) in Pool Name.
Select Single-host to enter an IP address of the host with MAC, if the binding
is intended for a specific host only.
Enter a DHCP range of addresses available for lease in IP. The right address
box will not show if Single-host is selected.
Optionally, DHCP options1 could be configured by entering an option code
and value in Code, Value and click ADD. The new DHCP option will show in
the OPTIONS list. To delete an option, choose it from the OPTIONS list and
click DEL after the box.
Click ADD at the bottom of the page to commit changes.
You can see the newly added DHCP POOL displayed in the DHCP POOL list.
40