__________________________________________________________________________________________________________________
TAGLab
Battery Charger |
C4
Introduction
•
Explanation of symbols and pictograms used in this user manual and/or the device:
You must follow these instructions prior to each use of the device
Follow warnings and safety instructions
The gases are explosive. The charger contains components which can cause
sparks. Sparks occurring on connection may cause an explosion. Place the
charger in a suitable area.
Never connect and disconnect the clamps of the charger to the terminals of the
battery when the mains plug is plugged into a socket
You must always remove the mains plug from the socket first.
Class II appliance. No earth connection is required.
Double-insulated casing
Dust and water resistant
Never dispose the electrical equipment with daily waste
•
Attention:
On certain vehicles, disconnection of the battery may lead to a loss of information and not
being able to restart. Refer to the vehicle manufacturer’s instruction manual.
•
Carefully study the user manual. The user manual should be kept in a safe place and submitted
together with the device in the event of these changing hands.
•
Thank you for purchasing
TAGLab C4 Battery Charger
.
•
The TAGLab C4 is suitable for charging open and a variety of closed, maintenance-free lead-acid batteries
as found in bike, cars, boats, and other vehicles, e.g.
o
WET batteries (Wet) Lead-acid batteries (liquid electrolyte)
o
GEL batteries (gel-type electrolyte)
o
AGM batteries (electrolyte inside absorbed glass matt)
o
Maintenance-free lead-acid batteries (MF)
