__________________________________________________________________________________________________________________
TAGLab
Battery Charger |
C4
•
Consequential damages caused by non-intended and / or improper use, and / or defective batteries.
•
Moisture and / or insufficient ventilation.
•
The unauthorised opening of the device.
•
This will void the Warranty.
Product Description
•
TAGLab C4 is designed for charging wide range of lead acid batteries used for passenger cars, motorcycles
and certain other vehicles – e. g. WET batteries (with liquid electro-lyte), GEL batteries (with electrolyte in gel
form) or AGM (absorbent glass mat) batteries.
•
The battery capacity ranges from 6V (1.2 ~ 16 Ah) to 12V (5 ~ 130 Ah).
•
The charger is equipped with a microprocessor (MCU - Micro Computer Unit) and features fully automatic 9
stages charging and maintenance.
•
After selecting the connected battery type (6V or 12V), the battery charger will recognise the battery capacity
and the battery condition and calculate the required charging parameters (charging voltage, charging
current).
•
This allows for efficient and safe charging. If the wrong battery voltage is set or the battery is defective, it will
not charge and the “Error” LED will light up (also see “Troubleshooting”).
•
The “trickle charge“ function allows the charger to be left permanently connected to maintain the full battery
charge. After completion of charging, the charger switches automatically to “trickle charge“ function.
Operation
Output Voltage
•
When not connected to a battery, the charger must not have any output voltage and avoid any short circuits.
The charger’s intelligent program does not release any voltage until a battery is correctly connected to the
charger.
Before use
•
Read the user manual before connecting up the charger.
•
Use safety goggles and acid-proof safety gloves.
•
Ensure adequate ventilation.
•
Make sure the terminals are clean, if required clean them with a brush and apply special grease to protect
