background image

5

Speaker Placement and Set-up

+ (RED color) speaker cable of your TRS SM speaker, and the amplifier Left output 

speaker terminal marked with - should be connected with Left - (BLACK color)  speaker 

cable of your TRS SM speaker. The same should be done for the Right channel. 

If your speaker is wired incorrectly it will be out of phase and it will sound indistinctly 

and with a weak bass. Re-check your connections and correct the polarity by reversing 

the connections.

NOTE! 

Make sure to securely connect the speaker cables with the cables of your TRS 

speaker.

WARNING!

 Check whether your amplifier may work with impedance of your TAGA 

Harmony speaker. Otherwise you may burn the amplifier and damage the speakers - it 

may void your warranty.

5. TRS L models

 

Accessories

Contents of 1 packaging:

A. Speaker x 2 pieces

B. Surface Mount x 2 pieces

C. Mount Arm x 2 pieces

D. Ground Stake x 2 pieces

E. Ceiling-Wall Mount x 2 pieces

F. Hex Socket Head Screw x 2 pieces [to attach the Mount Arm to the Surface Mount]

G. Nut x 2 pieces [to attach the Mount Arm to the Surface Mount]

H. Self-Tapping Screw  x 8 pieces [to attach the Surface Mount to the Ground Stake]

I. Screw x 8 pieces [to attach the Surface Mount to the Ceiling-Wall Mount]

J. Screw x 2 pieces [to attach the Mount Arm to the Speaker]

K. Nut x 8 pieces [to attach the Surface Mount to the Ceiling-Wall Mount]

L. Quick Speaker Connector – Terminal Block x 2 pieces 

M. Internal Hex Wrench x 1 piece

Содержание TRS Series

















Отзывы: