Taga Harmony TRS Series, Инструкция по эксплуатации

Страница: 14 / 16

14
Vertical angle regulation
The vertical position (angle) of your TRS L speaker can be adjusted. It can be
regulated forward and backward.
Using the Internal Hex Wrench loosen the Hex Socket Head Screw.
Set the required Speaker position and tighten the Hex Screw.
Note: Make sure to tighten the Hex Screw firmly but be cautious not to break the
thread or the mounts.
WARNING! For safety reasons never fully unscrew the Hex Screw when the Speaker
is installed above the ground level. This may result in serious injury and Speaker
damage.
Speaker Placement and Set-up
6. Your system is ready to use
ENJOY YOUR MUSIC
EVERYWHERE!