Taga Harmony TRS Series, Инструкция по эксплуатации

Страница: 10 / 16

10
Speaker Placement and Set-up
5. Set the speaker in the down position.
Using a screwdriver attach the Surface Mount
to the Ground Stake.
Note: Make sure not to damage the speaker
cable.
6. Set the required Speaker position and tighten the Hex Socket Head Screw (check
“Vertical angle regulation” for more details).
Note: Make sure to tighten the Hex Screw firmly but be cautious not to break the
thread or the mounts.
On-ceiling
WARNING!
Depending on the ceiling type, use an appropriate fixing system (ask your
local dealer or installer for advice).
We recommend to use the fixing system which is able to keep the weight at least 20%
higher than the actual weight of your TRS L speaker together with the Ceiling-Wall
mount.
Using improper installation accessories may result in serious injury and Speaker
damage.
Note: Screws, anchors / dowels are not included with your TRS L speaker.
The below installation guide is shown for the wooden ceiling.