Taga Harmony DA-400, Инструкция по эксплуатации

Страница: 15 / 28

14
Operation
Standby Mode
When you connect the Converter to the electrical outlet for the first time, it will start in the
Standby mode.
Turn ON – press once the Standby Button
Turn OFF – long press the Standby Button - Standby LED Indicator will be illuminated
Note! The Converter will start in the last selected input before it was turned off (The USB
input is default for a new unit).
Input (Source) Selection
When the Converter is turned on.
Short press the Input (Source) Selector Button to select one of the inputs (sources):
COAXIAL, OPTICAL or USB.
The selected input (source) is indicated by an icon on the Display.
Display
• The Converter operates only with the supported file formats.
• The displayed sample rate is calculated by the internal clock engine and is accurate.
• Some external equipment may provide signal information to the Converter, even
when the playback is not active or paused, then the “NO SIGNAL” message will not
be displayed.